Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-STABLE #0: Mon Mar 10 12:21:45 GMT 2008
    root@amber:/usr/obj/usr/src/sys/AMBER
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz (1995.02-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f6  Stepping = 6
  Features=0xafebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
real memory  = 2146238464 (2046 MB)
avail memory = 2090684416 (1993 MB)
ACPI APIC Table: <LENOVO TP-7F   >
ACPI Warning (tbfadt-0505): Optional field "Gpe1Block" has zero address or length:        0    102C/0 [20070320]
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <LENOVO TP-7F> on motherboard
acpi0: [ITHREAD]
acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xd0000000-0xdfffffff,0xee000000-0xee00ffff irq 16 at device 0.0 on pci1
pcm0: <Intel 82801G High Definition Audio Controller> mem 0xee400000-0xee403fff irq 17 at device 27.0 on pci0
pcm0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x6002> mem 0xee100000-0xee10ffff irq 16 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5752 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:1b:24:0b:8a:27
bge0: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xedf00000-0xedf00fff irq 17 at device 0.0 on pci3
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
wpi0: Ethernet address: 00:19:d2:b1:ef:f5
wpi0: [ITHREAD]
wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
pcib4: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0
pci12: <ACPI PCI bus> on pcib5
uhci0: <UHCI (generic) USB controller> port 0x1800-0x181f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1820-0x183f irq 17 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1860-0x187f irq 19 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xee404000-0xee4043ff irq 19 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci21: <ACPI PCI bus> on pcib6
cbb0: <PCI-CardBus Bridge> mem 0xe4300000-0xe4300fff irq 16 at device 0.0 on pci21
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [ITHREAD]
fwohci0: <1394 Open Host Controller Interface> mem 0xe4302000-0xe43027ff,0xe4304000-0xe4307fff irq 17 at device 0.1 on pci21
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:06:1b:00:20:27:29:a6
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:06:1b:27:29:a6
fwe0: Ethernet address: 02:06:1b:27:29:a6
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:06:1b:00:20:27:29:a6 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x7d8dc000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
pci21: <mass storage> at device 0.2 (no driver attached)
pci21: <base peripheral> at device 0.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1880-0x188f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <Intel AHCI controller> port 0x18c8-0x18cf,0x18ac-0x18af,0x18c0-0x18c7,0x18a8-0x18ab,0x18b0-0x18bf mem 0xee404400-0xee4047ff irq 16 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: port not implemented
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci1
ata4: port not implemented
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci1
ata5: port not implemented
ata5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd1800-0xd27ff,0xdc000-0xdffff,0xe0000-0xeffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), class 0/0, rev 1.10/3.00, addr 2> on uhub1
ums0: 5 buttons and Z dir.
ugen0: <Broadcom Corp BCM2045B, class 224/1, rev 2.00/1.00, addr 2> on uhub2
ugen1: <STMicroelectronics Biometric Coprocessor, class 0/0, rev 1.00/0.01, addr 3> on uhub2
Timecounter "TSC" frequency 1995019308 Hz quality 800
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
acd0: DVDR <MATSHITADVD-RAM UJ-850/RB11> at ata0-master UDMA33
ad4: 95396MB <Seagate ST910021AS 4.06> at ata2-master SATA150
pcm0: <HDA Codec: Analog Devices AD1981HD>
pcm0: <HDA Driver Revision: 20071129_0050>
GEOM_LABEL: Label for provider ad4s1 is ntfs/Preload.
GEOM_LABEL: Label for provider ad4s3 is msdosfs/SERVICEV001.
Trying to mount root from ufs:/dev/ad4s2a
Loading configuration files.
kernel dumps on /dev/ad4s2b
Entropy harvesting:
 interrupts
 ethernet
 point_to_point
 kickstart
.
swapon: adding /dev/ad4s2b as swap device
Starting file system checks:
/dev/ad4s2a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s2a: clean, 84904 free (1960 frags, 10368 blocks, 1.5% fragmentation)
/dev/ad4s2g: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s2g: clean, 1319272 free (776 frags, 164812 blocks, 0.1% fragmentation)
/dev/ad4s2d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s2d: clean, 126305 free (41 frags, 15783 blocks, 0.0% fragmentation)
/dev/ad4s2f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s2f: clean, 993126 free (33838 frags, 119911 blocks, 1.3% fragmentation)
/dev/ad4s2e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s2e: clean, 203700 free (148 frags, 25444 blocks, 0.1% fragmentation)